RØR & RØR EVO – Step by Step

RØR makes smoking not only stylish, but also super easy. Here we show you step by step how to get the most out of your RØR - from filling to cleaning. Whether you're just starting out or already a pro, with RØR every session is a pleasure. Ready? Let's go!

1 3

Cleaning - Step by Step

Why cleaning is important

Sure, a thick layer of resin might not look particularly stylish – but that's not the real problem. Resin gets greasy quickly, and after just a few sessions, unwanted residue builds up inside. With every puff, that goes straight into your lungs.

You don't need to clean your pipe daily, but once a week is a good rule for your health.

What you need

To clean your RØR you will need:

  • A cleaning tube from your cleaning kit (alternatively a zip-bag)
  • Isopropanol (91% for best results)
  • Pipe cleaner or brush
  • Alcohol pads
  • Water
  • Paper towels

Step-by-step: How to clean your One Hitter

Step 1 — Disassemble

Take apart your RØR or RØR EVO as described in the assembly guide.

Step 2 — Fill the cleaning tube

Fill with isopropyl alcohol until the device is fully covered.

Step 3 — Soak

Seal the tube, shake gently for about 60 seconds, then let it soak for 30 minutes.

Step 4 — Rinse

Rinse thoroughly with warm water. Use a pipe cleaner or brush for hard-to-reach areas.

Step 5 — Final Rinse & Dry

Rinse until no alcohol smell remains. Air dry or wipe with a paper towel.

Step 6 — Reassemble

Put it back together as described in the assembly guide.